FujiFilm DR-ID 1300 Service Manual page 281

<Enabling set value (MC)>
(1) Click [Update Network Setting (MC ETH1)] on the NETWORK SETTING
window.
The confirmation dialogue box of "Are you sure?" appears.
(2) Click [OK].
(3) Check that the set value is effective.
#1 Check: OK indication
Update Network Setting
(MC ETH1)
<Display example>
(4) Left-click the MC Manager from the task tray and excute "EXIT".
Check that the MC Manager icon has disappeared from the task tray, and then start
the MC Manager from "Start menu" → "Start-up".
018-234-02E
#1
1200_700169E.ai
<Restarting the machine and checking the setting effected>
(1) Turn OFF the power in the order named of the CL, MC and MP.
(2) Turn ON the power in the order named of the MP, CL and MC.
(3) Start up the MUTL.
(4) Click [Network Setting] and click [SE Network Setting >>].
Check that the IP address of the SE has been changed.
REFERENCE
If you confirm the IP address of the SE, you can determine that the change in
settings of the MP and the MC normally ends. This is because connection of
the SE can be confirmed only when connection between the MC and the MP is
normal.
DR-ID 1300 / DR-ID 1300PU Service Manual
MU2-16
MU2-16