FujiFilm DR-ID 1300 Service Manual page 545

10.10.2 Updating SE Application Software Version
NOTE
Follow the procedures below only when the version update of the SE application
software is necessary.
(1) Make sure that the install disk is inserted in the DVD drive of the CL.
(2) Click [INSTALL] command, click [Install SE Software >>] and input the
target SE No.
#1 Click: INSTALL
#2 Click: Install SE Software >>
#3 Input: SE No.
INSTALL window
018-234-04E
#1
#2
Install SE Software>>window
#3
1200_700120E.ai
(3) Click [Install SE FPGA Software].
#1 Click: [Install SE FPGA Software]
Install SE1 Software>>window
(4) Click [OK] when the confirmation window opens.
(5) Check that the installation is completed, and click [Install SE LAN
Software].
#1 Check: OK
#2 Click: [Install SE LAN Software]
Install SE1 Software>>window
#1
(6) Click [OK] when the confirmation window opens.
DR-ID 1300 / DR-ID 1300PU Service Manual
IN2-68
#1
1200_700125E.ai
#2
1200_700122E.ai
IN2-68