FujiFilm DR-ID 1300 Service Manual page 271

 Common MUTL Operating Procedures
The operating procedures common to various MUTL windows are described below:
"Category selection" buttons
"Result display area" "Lower hierarchical level" mark
l "Category selection" buttons
The "category selection" buttons are used to select an MUTL category. The following
MUTL categories are selectable:
- NETWORK SETTING
- SE SETTING
- VERSION CHECK
- INSTALL
- BOARD STATE CHECK
- CALIBRATION
- SYSTEM
018-234-02E
"Category change" buttons
"Function execution" buttons
1200_400004E.ai
l "Category change" buttons
These buttons are used to change the displayed category. When you click the
rightward arrow button, the next category appears on the display. Clicking the leftward
arrow button displays the previous category.
The following windows are used for the MUTL categories:
- MUTL window 1: NETWORK SETTING, SE SETTING, VERSION CHECK
- MUTL window 2: INSTALL, BOARD STATE CHECK, CALIBRATION
- MUTL window 3: SYSTEM
l "Function execution" buttons
These buttons are used to execute the MUTL functions.
Some functions are executed the moment a button is clicked. The other functions are
executed when you enter a setting and then click a button.
l "Lower hierarchical level" mark ">>"
When you click a button having this mark, the associated lower hierarchical level
buttons appear on the display.
l "Result display area"
Results of operation of the "Function execution" buttons are displayed as a text. The
following types of displays are shown.
- OK/Error indication type
Displays the MUTL result as "OK" or "Error". "OK" appears if the result is good, and
"Error!!" appears if not. An error code is displayed on the right of "Error" in some
cases.
- Address indication type
Displays a network address or a MAC address.
- Board version indication type
Displays the version of the selected board.
- Exposure count indication type
Displays the number of exposures in progress (exposure count).
DR-ID 1300 / DR-ID 1300PU Service Manual
MU2-6
MU2-6