(7) Confirm that the "Automatically start the WinPcap driver at boot
timecheck box is checked, and then click [Install].
#1 Verify: utomatically start the WinPcap driver at boot time
#2 Click: [Install]
The "Completing the WinPcap 4.1.3 Setup Wizard" window opens.
(8) Click [Finish].
#1 Click: [Finish]
018-234-03E
#1
#2
1200_700107.ai
#1
1200_700108.ai
DR-ID 1300 / DR-ID 1300PU Service Manual
(9) Click [OK].
Return to the desktop screen.
#1 Click: [OK]
#1
(10) Remove the install disk from the DVD drive.
(11) Restart the CL.
NOTE
If any error occurs during installation, reinstall the MC application after uninstalling it.
Follow the procedures below to uninstall the MC application.
1. Insert the install disk into the DVD drive.
The "Set Up PC-TOOL" window starts.
2. Select ".\Initial\apl_initial\install.bat" from the "FILE EXECUTION" pull-down menu,
and then click [EXECUTE].
The "Are you sure you want to uninstall MC application?" dialog appears.
3. Click [OK].
AppxIN7-4
600_700260.ai
AppxIN7-4