FujiFilm DR-ID 1300 Service Manual page 111

l In the case where the MP has some abnormalities
There is a log of life check requirement (LifeCkRq) but no response (LifeCkRs) from
the MP.
2013/02/19 13:46:59 00191361
LifeCkRq
:
:
* In the case where two MPs are connected, the logged IP address can be used to
identify the unresponsive MP.
Ex.) Normal case (Two MPs process the life check requirement /response.)
2013/02/19 13:46:32 00190931
0005000710010200 LifeCkRq
2013/02/19 13:46:32 00190931
0007000510010300 LifeCkRs 0000
2013/02/19 13:46:32 00190931
0005000710010200 LifeCkRq
2013/02/19 13:46:32 00190931 192.168.0.21 0007000510010300 LifeCkRs 0000
:
:
* LifeCkRq: Life check requirement from the MC
LifeCkRs: Life check response from the MP
Ex.) Abnormal case (One MP processes the life check requirement /response.)
2013/02/19 13:46:59 00191361
0005000710010200 LifeCkRq
2013/02/19 13:46:59 00191361
0007000510010300 LifeCkRs 0000
2013/02/19 13:46:59 00191361
0005000710010200 LifeCkRq
.
.
The MP of 192.168.0.21 does not respond to the underlined life check requirement in
red. This shows that a possibly abnormal MP has this IP address.
Possibly abnormal parts are the ERC54A board and the HUB of this MP.
Replace the parts, identify the location of the failure, and then repair it.
If the failure is not solved after the parts are replaced, check the MPC54A board.
018-234-06E
192.168.0.20 0005000710010200
192.168.0.20
192.168.0.20
192.168.0.21
192.168.0.20
192.168.0.20
192.168.0.21
DR-ID 1300 / DR-ID 1300PU Service Manual
AppxMT1-7
AppxMT1-7