FujiFilm DR-ID 1300 Service Manual page 578

(3) Remove the MP front cover.
#1 Remove: T3x6 (x6)
#1
(4) Remove the MP rear cover.
#1 Remove: T3x6 (x3)
Rear cover
#1
018-234-02E
Front cover
1200_700027E.ai
1200_700028E.ai
(5) Disconnect all connectors of the SE cable from the MPC54B board.
#1 Disconnect: Cable connectors (MPC6, 7)
#1
MPC7
MPC6
(6) Connect the jig cable <supplied accessory> to the connector (MPC2)
of the MPC54B board.
NOTE
Connect the jig cable after disconnecting the cable connector of the remote
switch if the remote switch (optional item) is connected.
#1 Connect: Jig cable <supplied accessory>
#1
MPC2
DR-ID 1300 / DR-ID 1300PU Service Manual
AppxIN2-2
1300_700027.ai
1300_700028.ai
AppxIN2-2