FujiFilm DR-ID 1300 Service Manual page 454

■ Changing the Network Address Field and the MC Subnet Mask
INSTRUCTION
The segment No. of the network address must be set to the same value among
the MC, MP, SE and AP. If different network address values are set, the network
among the machines might get disconnected. Initialization of the machines might
be needed in such a case.
How far in the IP address the network address indicates depends on the setting
of the subnet mask. As the default value of the subnet mask of the machine is
255.255.255.0, and locations assigned by 255 (mask value areas) indicate the
network address.
The default value of the network address is "192.168.0".
Segment No.
192.168.0.0
Network address
Host address
018-234-06E
600_700206.ai
(1) Change the Network Address Field and MC Subnet Mask of MC ETH 1
Network (Local).
DR-ID 1300 / DR-ID 1300PU Service Manual
IN1-73
1200_700520E.ai
IN1-73