FujiFilm DR-ID 1300 Service Manual page 456

■ Changing the MC Network Setting
(1) Click [SET] of MC ETH1 Network Setting.
The following window opens.
(2) Restart all of the SE/MP/MC.
(3) Open the Internet Explorer, input "http://(Changed the IP address of
MC):19101/index.html" in the address bar and press the [Enter] key.
DR Maintenance Software starts.
018-234-06E
(4) Select the "Changing the IP address SE/MP/MC", confirm that the SE/
(5) Restart the DR Maintenance Software.
(6) Click [Next].
1200_700525E.ai
1200_700526E.ai
DR-ID 1300 / DR-ID 1300PU Service Manual
MP/MC IP address has been changed correctly.
INSTRUCTION
If the IP address of the MP or the SE is lost by mistake during the operation
procedures, restore the IP address.
{IN:Appendix 2._Restoring the IP Address of the MP/SE}
REFERENCE
In case of the DR Maintenance Software restart, reopen the Internet Explorer
again.
IN1-75
IN1-75