FujiFilm DR-ID 1300 Service Manual page 168

 Tree of DR Maintenance Software
Tree of Maintenance Utility
{1.1_UPDATE SOFTWARE}
{1.1.1_Update MP}
{1.1.2_Update SE}
{1.2_PANEL SETTING}
{1.2.1_SE Registration/Deletion}
{1.2.2_SE Wireless Setting}
{1.2.3_LED Color Setting}
{1.2.4_Memory Mode Setting}
{1.2.5_CALNEO GL Panel Registration/Deletion}
{1.3_CONFIG SETTING}
{1.3.1_MC Setting}
{1.3.2_RU Image FLAG}
{1.3.3_Wireless Setting}
{1.3.4_SE Sleep Mode Setting}
{1.4_CALIBRATION}
{1.4.1_SE Calibration}
{1.4.2_Long Panel Calibration}
{1.4.3_Sensitivity Correction Coefficient}
{1.4.4_GLG Calibration}
{1.4.5_SE Correct Data Transfer}
{1.4.6_Line Defects Data Registration}
{1.4.7_Long Panel Line Defect Data Registration}
{1.4.9_Point Defect Specifications Excess Area Display}
{1.4.10_Long Panel Point Defect Specifications Excess Area Display}
{1.5_NETWORK SETTING}
{1.5.1_Local Network}
{1.6_CHECK DEVICE STATE}
{1.6.1_Check Version}
{1.6.2_Check Board Status}
018-234-06E
{1.6.3_SE Wireless Setting}
{1.6.4_Battery Information}
{1.6.5_SE Registration Information}
{1.7_HISTORY}
{1.7.1_UPRIGHT}
{1.7.2_TABLE}
{1.8_LOG}
{1.9_UTILITY}
{1.9.1_Terminate MC}
{1.9.2_Reboot MC}
{1.9.3_Force Reboot MC}
{1.9.4_Web Maintenance Status}
{1.9.5_Check PING}
{1.9.6_Check FTP}
{1.9.7_FTP Network Setting (for Active Line)}
{1.9.8_Force Serial ID Writing}
{1.9.9_Replace Long Panel RMV Board}
{1.9.10_Update SE CPU (0x0220)}
{1.9.11_Update SE FPGA}
{1.9.12_Replace MP}
{1.9.13_LED Color RGB Setting}
{1.9.14_Battery Threshold Setting}
{1.9.15_Force Charge the Battery}
{1.10_BACKUP/RESTORE}
{1.10.1_SE Correct Data Backup/Restore}
{1.10.2_CALNEO GL Panel Correct Data Backup/Restore}
{1.10.3_DR-ID 1422SE Correct Data Back up/Restore}
{1.10.4_Config Setting Backup/Restore}
{1.10.5_HISTORY Backup}
{1.10.6_LOG Backup}
DR-ID 1300 / DR-ID 1300PU Service Manual
Tree of Maintenance Utility
MU1-3
MU1-3