FujiFilm DR-ID 1300 Service Manual page 327

l WLAN OUTPUT
Set whether the wireless LAN output is to be used or not.
<Options>
- OFF: Not used
- ON [default]: Used
l WLAN AUTO RATE
Set whether the wireless LAN transmission rate is constant or varible.
<Options>
- CONSTANT [default]
- VARIABLE
REFERENCE
If the wireless environment is not stable or easily fluctuates, set to "VARIABLE". If the
wireless environment is stable, use "CONSTANT".
l COUNTRY CODE (xxxx)
Input the counry code according to that has set to the SE at factory prior to shipment.
- 4-character string or less [default: 4036]
u NOTE u
- The communication with the SE can be possible by inputting the country code.
The country codes are described as follows.
Japan: 4015
Europe: 56
USA: 841
China: 156
Taiwan: 158
Other countries: 392
- For the system coexistent with the SE of DR-ID 600 series, set "4036" regardless of
the above. Moreover, select frequency 5GHz W52 from "CHANNEL & MODE".
l BSSID (xxxxxxxxxxxx)
Input the MAC address of the AP (BSSID) when wireless connection is to be made
by specifying the AP. Although input is not needed usually, inputting the BSSID is
recommended when two or more AP's are to be used.
The MAC address is mentioned on the label or in the instruction manual of the AP.
<Settable range>
- 12-character string [default: 000000000000]
018-234-03E
l ENCRYPTION (encryption yes/no setting)
This sets whether wireless communication is to be encrypted or not.
<Options>
• OFF:
• ON [default]:
REFERENCE
- For MC software V13 or later, the default value is changed to ON.
- A separate encryption setting on the AP side is also required.
Encryption method: AES
Authentication method: WPA2-PSK (Wi-Fi Protected Access 2 Pre Shared Key)
- When SE is shared by multiple systems, the encryption settings in the SE are
rewritten by connecting the SE once to the SE cable of the movement destination.
l ENCRYPTION KEY (encryption key)
Enter the text string (pass phrase) for generation of the encryption key for wireless
communication.
<Setting range>
A single-byte text string of 8 to 63 characters [default: Fujifilm]
REFERENCE
- The pass phrase entered for this item also must be set on the AP side.
- This unit is not compatible with the pass phrase automatic change function (only
manual setting is possible).
DR-ID 1300 / DR-ID 1300PU Service Manual
No encryption
Encryption
MU2-62
MU2-62