FujiFilm DR-ID 1300 Service Manual page 174

(1) Click "PANEL SETTING" - "CALENO GL Panel Registration/Deletion".
The CALENO GL Panel Registration/Deletion window opens.
(2) Click [Add].
The CALENO GL Panel window opens.
REFERENCE
If [Mod] is clicked, the registered long panel serial IDs can be changed.
(3) After entering the SE (3 panel units) serial ID which are to be
registered, click [OK].
The serial ID of the CALENO GL Panel is registered.
018-234-04E
1300_700066E.ai
 CALENO GL Panel Deletion
A registered long panel can be canceled.
Used when the long panel needs to be replaced.
u NOTE u
Disconnect the SE cable from the SE before deleting the SE. Otherwise, the SE
cannot be deleted.
(1) Click "PANEL SETTING" - "CALENO GL Panel Registration/Deletion".
The CALENO GL Panel Registration/Deletion window opens.
(2) Click [Del] for the corresponding SE.
The Panel Deletion window opens.
(3) Click [OK].
The CALENO GL Panel Registration is deleted.
DR-ID 1300 / DR-ID 1300PU Service Manual
MU1-9
(1)
(2)
1300_410015E.ai
MU1-9