FujiFilm DR-ID 1300 Service Manual page 5

Servicing Instruments and Tools That Require
Inspection/Calibration
The machine should be installed and serviced by use of servicing instruments and
tools that have been regularly inspected and calibrated as appropriate.
If the machine were serviced using servicing instruments and tools that have not
been inspected and calibrated, proper performance of the machine could not be
guaranteed.
Servicing instruments and tools that require inspection/calibration are as listed below.
The inspection/calibration should be planned and performed in accordance with the
specifications and operation manuals of the applicable servicing instruments and
tools.
 Instruments and Tools That Require Inspection/Calibration
Name Inspection
Dosimeter
Steel rule (150 mm)
Steel rule (300 mm)
Digital multimeter
Calipers  (
∗
: A block gauge for use in inspection requires calibration.
018-234-02E
Calibration
-

-

-

 
∗
) -
DR-ID 1300 / DR-ID 1300PU Service Manual
0.3
0.3