FujiFilm DR-ID 1300 Service Manual page 279

(2) Click [MC ETH1/MP>>] and input the MC/MP network address, then
click [SET].
Clicking [SET], the indication changes over to the input value, but the set value is
not effective. To make the changed set value effective, the set value needs to be
enabled (setting executed) respectively for the SE, MP and MC.
#1 Click: [MC ETH1/MP>>]
#2 Input: MC/MP network address
#3 Click: [SET]
Local Network PreSetting >> window
018-234-02E
#1
MC ETH1/MP>>window
#2
#3
1200_700164E.ai
(3) Click the target SE, input the SE network address and click [SET].
Clicking [SET], the indication changes over to the input value, but the set value is
not effective. To make the changed set value effective, the set value needs to be
enabled (setting executed) respectively for the SE, MP and MC.
#1 Click: Target SE
#2 Input: SE network address
#3 Click: [SET]
Local Network PreSetting>>window
REFERENCE
By clicking [SE Network Address Setting] on the "Local Network PreSetting>>"
window, the SE Network Address Batch Setting window opens and the SE
network addresses can be set collectively.
(4) Clicking [BACK], return to the Local Network PreSetting window.
(5) If there is any item that you wish to input, click the corresponding
button and repeat procedures (3) to (4).
(6) Clicking [BACK], return to the NETWORK SETTING window.
DR-ID 1300 / DR-ID 1300PU Service Manual
MU2-14
#1
SE1-5>>window
#2
#3
1200_700166E.ai
MU2-14