Test Harness Connection - Honda NSS250S Manual

TEST HARNESS CONNECTION

Remove the inner cover (page 3-27).
Connect the RF unit 5P (Green) connector (page 23-
28).
Turn the ignition switch OFF.
Disconnect the handle lock module 21P (Black) con-
nector.
Connect the test harness 21P between the main wire
harness and handle lock module.
TOOL:
ECM test harness 21P
TEST HARNESS TERMINAL LAYOUT
The handle lock module 21P (Black) connector ter-
minals are numbered as shown in the illustration.
The test harness 21P terminals are same layout as
for the handle lock module connector terminals as
shown.
maxiscooter-club.ru
070MZ-GEV0100
Honda Smart Card Key System
HANDLE LOCK MODULE
TEST HARNESS 21P
HANDLE LOCK MODULE 21P CONNECTOR
1
7
8 14
21
15
TEST HARNESS 21P
21P CONNECTOR
23-17