Honda NSS250S Manual page 444

FRONT WHEEL/SUSPENSION/STEERING
Hold the steering stem adjusting nut using the pin
spanner then loosen the steering stem lock nut
using the socket wrench.
TOOLS:
Socket wrench
Pin spanner
Remove the steering stem lock nut.
Remove the lock washer.
Loosen the steering stem lock nut using a special
tool.
TOOL:
Pin spanner
Hold the steering stem and remove the steering
stem adjusting nut.
Remove the upper dust seal, inner race and upper
ball bearing.
15-26
maxiscooter-club.ru
07916-KM10000
07702-0020001
07702-0020001
LOCK NUT
ADJUSTING NUT
LOCK WASHER
PIN SPANNER
ADJUSTING NUT
UPPER DUST SEAL
UPPER INNER RACE UPPER BALL BEARING
SOCKET WRENCH
PIN SPANNER