Honda NSS250S Manual page 362

DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
Install the movable driven pulley face onto the
driven pulley face.
Install the guide rollers and guide roller pins.
Apply 4.0 – 5.0 g (0.14 – 0.18 oz) of grease to the
driven face guide grooves of the movable driven
pulley face.
Install the seal collar.
CLUTCH ASSEMBLY
Install the damper rubbers onto the pivot pins on
the drive plate.
Install the clutch shoes and shoe springs onto the
drive plate.
• Be careful not to damage the damper rubbers.
11-34
maxiscooter-club.ru
PIN DRIVEN PULLEY FACE
GUIDE ROLLER
SEAL COLLAR
DAMPER RUBBERS
SPRINGS
CLUTCH SHOE