Honda NSS250S Manual page 446

FRONT WHEEL/SUSPENSION/STEERING
Drive a new upper bearing outer race into the head
pipe using special tools.
TOOLS:
Driver
Attachment, 42 x 47 mm
LOWER INNER RACE REPLACEMENT
Remove the lower bearing inner race with a chisel
or equivalent tool being careful not to damage the
stem.
Remove the lower dust seal.
Apply specified grease (page 1-20) to a new lower
dust seal lips then Install a new dust seal.
Install a new lower bearing inner race using a spe-
cial tool and hydraulic press.
TOOL:
Inner driver, 35 mm
15-28
maxiscooter-club.ru
07749-0010000
07746-0010300
07746-0030400
ATTACHMENT
UPPER OUTER RACE
LOWER INNER RACE
DUST SEAL/LOWER INNER RACE
INNER DRIVER
DRIVER
DUST SEAL