Headlight; Bulb Replacement - Honda NSS250S Manual

HEADLIGHT

• For headlight removal/installation (page 3-22)

BULB REPLACEMENT

Remove the console box (page 3-24).
Left side headlight:
Remove the right inner box (page 3-26).
Right side
headlight:
Remove the trim clip and headlight maintenance lid.
Disconnect the headlight connector.
Remove the dust cover.
Unhook the bulb retainer and remove the headlight
bulb.
• Avoid touching a halogen headlight bulb. Finger-
prints can create hot spots that cause a bulb to
break.
• If you touch the bulb with your bare hands, clean
it with a cloth moistened with alcohol to prevent
its early failure.
Install a new headlight bulb by aligning the tabs on
the headlight bulb with the grooves in the headlight
unit.
Hold the headlight bulb and hook the bulb retainer
into the headlight groove.
Install the dust cover tightly against the headlight
unit as shown.
Connect the headlight connectors.
Installation is in the reverse order of removal.
maxiscooter-club.ru
LIGHTS/METERS/SWITCHES
GROOVE RETAINER
TAB
BULB
HEADLIGHT CONNECTOR
MAINTENANCE LID
TRIM CLIP
DUST COVER
22-7