FRAME/BODY PANELS/EXHAUST SYSTEM
SCREEN GARNISH
REMOVAL/INSTALLATION
Remove the meter visor cover, bolts, collars, wash-
Do not scratch or
ers and meter visor.
damage the meter
visor.
Remove the screw.
Remove the screen garnish by releasing the follow-
ing:
– Front side tab of the screen garnish from the
grommet of the right headlight unit
– Snap fit clips of the screen garnish from the
holes of the front side covers
– Tabs of the screen garnish from the holes of the
rear meter panel
Installation is in the reverse order of removal.
3-18
maxiscooter-club.ru
METER VISOR COVERS
BOLTS/COLLARS/WASHERS
SCREEN GARNISH
TAB
TAB
SCREW
GROMMET
METER VISOR
SNAP FIT CLIPS
HOLES