Body Cover - Honda NSS250S Manual

BODY COVER

REMOVAL/INSTALLATION
Remove the floor side panel (page 3-6).
Remove the rear body lower cover (page 3-10).
Remove the screw, trim clip B and bolt/washer.
Release the hooks of the body cover from the
Be careful not to
grooves of the rear body upper cover, luggage box
damage the hooks
and floor step by slightly pulling the body cover
and grooves.
rearward.
NSS250A shown:
HOOKS
BODY COVER
BOLT/WASHER
Installation is in the reverse order of removal.
maxiscooter-club.ru
GROOVES
TRIM CLIP B
SCREW
FRAME/BODY PANELS/EXHAUST SYSTEM
3-11