Honda NSS250S Manual page 354

DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
Install the reduction gear B and movable drive pul-
ley face assembly as a set.
Install the drive pulley face boss A.
Install the drive belt onto the movable drive pulley
face assembly.
Install the drive pulley face by aligning the splines.
Coat new O-rings with oil and install them to the
grooves of the collar.
Fill the grooves of the collar with 0.10 g (0.004 oz) of
the molybdenum disulfide paste.
11-26
maxiscooter-club.ru
REDUCTION GEAR B
DRIVE PULLEY FACE ASSEMBLY
DRIVE BELT
BOSS A
DRIVE PULLEY FACE
O-RINGS
COLLAR