Front Wheel/Suspension/Steering - Honda NSS250S Manual

DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
ITEM
Clutch outer nut
Screw holder socket bolt
(NSS250A)
Stopper arm socket bolt (NSS250A)
Stopper plate socket bolt
(NSS250A)
Drive face bolt
Driven pulley nut
FINAL REDUCTION
ITEM
Final reduction case bolt
ALTERNATOR/STARTER CLUTCH
ITEM
Flywheel bolt
Starter clutch outer socket bolt
CRANKCASE/CRANKSHAFT/BALANCER
ITEM
Right/Left crankcase socket bolt
Cam chain tensioner bolt
Bearing cap nut
Center stand hook bolt

FRONT WHEEL/SUSPENSION/STEERING

ITEM
Front axle holder bolt
Steering stem adjusting nut
Steering stem lock nut
Handlebar upper holder socket bolt
Handlebar lower holder nut
Front axle bolt
Handlebar post mounting bolt
Fork cap bolt
Fork socket bolt
Fork mounting bolt
Front brake disc socket bolt
maxiscooter-club.ru
THREAD
Q'TY
DIA. (mm)
1 12
6 6
6 6
1 6
1 10
1 30
THREAD
Q'TY
DIA. (mm)
7 8
THREAD
Q'TY
DIA. (mm)
1 10
6 6
THREAD
Q'TY
DIA. (mm)
2 8
1 6
2 8
1 6
THREAD
Q'TY
DIA. (mm)
2 8
1 26
1 26
4 8
2 10
1 14
2 12
2 30
2 10
4 10
4 8
GENERAL INFORMATION
TORQUE
N·m (kgf·m, lbf·ft)
74 (7.5, 55)
10 (1.0, 7)
10 (1.0, 7)
10 (1.0, 7)
83 (8.5, 61) Apply oil to the threads and
seating surface, UBS bolt.
79 (8.1, 58)
TORQUE
N·m (kgf·m, lbf·ft)
24 (2.4, 18)
TORQUE
N·m (kgf·m, lbf·ft)
103 (10.5, 76) Apply oil to the threads and
seating surface, UBS bolt.
23 (2.3, 17) Apply locking agent to the
threads.
TORQUE
N·m (kgf·m, lbf·ft)
23 (2.3, 17) Apply locking agent to the
threads.
12 (1.2, 9)
33 (3.4, 24) Apply oil to the threads and
seating surface.
12 (1.2, 9) Apply locking agent to the
threads.
TORQUE
N·m (kgf·m, lbf·ft)
22 (2.2, 16) ALOC bolt; replace with a
new one.
– See page 15-29
74 (7.5, 55)
27 (2.8, 20)
39 (4.0, 29) U-nut
69 (7.0, 51)
128 (13.1, 94) ALOC bolt; replace with a
new one.
22 (2.2, 16)
29.4 (3.0, 22) Apply locking agent to the
threads.
69 (7.0, 51)
42 (4.3, 31) ALOC bolt; replace with a
new one.
REMARKS
REMARKS
REMARKS
REMARKS
REMARKS
1-15