Wheels/Tires - Honda NSS250S Manual

MAINTENANCE

WHEELS/TIRES

FRONT WHEEL
Support the scooter on its center stand.
Jack up the scooter to raise the front wheel off the
ground.
Hold the front fork and move the front wheel side-
ways forcefully to see if the front wheel bearings are
worn.
Replace the bearings if any looseness is noted (page
15-13).
REAR WHEEL
Support the scooter on its center stand and raise the
rear wheel off the ground.
Hold the swingarm and move the rear wheel side-
ways forcefully to see if the final bearings or
swingarm bearing are worn.
Replace
swingarm bearing (page 16-9) if any looseness is
noted.
TIRES
Check the tire pressure with the air pressure gauge
when the tires are cold.
RECOMMENDED TIRE PRESSURE: kPa (kgf/cm
Driver only
Driver and passen-
ger
4-24
maxiscooter-club.ru
the final bearings (page
FRONT
175 (1.75, 25) 200 (2.00, 29)
175 (1.75, 25)
NSS250A shown:
12-6) and
AIR PRESSURE GAUGE
2
, psi)
REAR
225 (2.25, 33)