Honda NSS250S Manual page 699

maxiscooter-club.ru
REDUCTION GEAR REMOVAL
Remove the movable drive face position sensor
(page 24-54).
Remove the bolts and ratio control gear holder.
Remove the reduction gear B.
Remove the bolts and reduction gear A holder.
Remove the reduction gear A.
INSPECTION
MOVABLE DRIVE FACE POSITION SENSOR SHAFT
Check the sensor shaft gear for wear or damage.
Replace it if necessary.
Honda S Matic System (NSS250A)
BOLTS
REDUCTION GEAR B
BOLTS REDUCTION GEAR A
SENSOR SHAFT
GEAR HOLDER
GEAR A HOLDER
24-55