Honda NSS250S Manual page 344

DRIVE PULLEY/DRIVEN PULLEY/CLUTCH
Install the slide pieces and ramp plate into the mov-
able drive pulley face.
Apply grease to a new movable drive pulley dust
Do not apply grease
seal lips.
to the movable
drive pulley face.
Install the dust seal to the movable drive pulley
face.
Install the drive pulley face boss to the movable
drive pulley face.
INSTALLATION
Install the movable drive face assembly onto the
crankshaft while holding the ramp plate.
11-16
maxiscooter-club.ru
SLIDE PIECE
DRIVE PULLEY FACE
DUST SEAL
BOSS
DRIVE PULLEY FACE
DRIVE FACE BOSS
DRIVE PULLEY FACE/RAMP PLATE
RAMP PLATE