Front Turn Signal Light/Position; Rear Combination Light - Honda NSS250S Manual

LIGHTS/METERS/SWITCHES
FRONT TURN SIGNAL LIGHT/
POSITION LIGHT
• For front turn signal light and position light
removal/installation (page 3-22)
BULB REPLACEMENT
FRONT TURN SIGNAL LIGHT
Remove the front lower cover (page 3-20).
Remove the turn signal light bulb socket by turning
it counterclockwise.
Remove the bulb from the socket.
Install the turn signal light bulb socket in the reverse
order of removal.
POSITION LIGHT BULB
Turn the position light bulb socket counterclockwise
and pull it out.
Remove the position light bulb from the bulb
socket.
Installation is in the reverse order of removal.

REAR COMBINATION LIGHT

• For rear combination light removal/installation
(page 3-14)
BULB REPLACEMENT
BRAKE/TAIL LIGHT
Remove the rear body lower cover (page 3-10).
Remove the brake/tail light bulb socket by turning it
counterclockwise.
Remove the bulb from the socket and replace it with
a new one.
Installation is in the reverse order of removal.
22-8
maxiscooter-club.ru
POSITION LIGHT BULB
BULB SOCKET
BULB
SOCKET
BULB
SOCKET