Rear Spoiler - Honda NSS250S Manual

REAR SPOILER

REMOVAL/INSTALLATION
Remove the rear seat (page 3-8).
Remove the screws.
Carefully pull the spoiler cover out and release the
tabs of the spoiler cover from the spoiler lower
cover grooves in specified sequence as shown.
Remove the spoiler cover upward.
Be careful not to
damage the tabs
and grooves.
Remove the screws and seat lock cover from the
rear spoiler.
Disconnect the luggage box light connectors and
seat lock cable from the seat lock.
Remove the bolts and rear spoiler.
Installation is in the reverse order of removal.
Route the cable and
wire properly (page
• Fill the seat lock sliding surface with 1.5 g (0.05
1-21).
oz) of grease.
maxiscooter-club.ru
FRAME/BODY PANELS/EXHAUST SYSTEM
SCREWS
SEAT LOCK CABLE
SPOILER COVER
3.
4.
2.
1.
1.
TABS
OUT
SIDE
GROOVES
SPOILER COVER
CONNECTORS
SCREWS
SEAT
LOCK
COVER
BOLTS
REAR
SPOILER
SEAT LOCK
CABLE
3-13
3.
2.