Brake Light Switch; Brake Lock Operation - Honda NSS250S Manual

MAINTENANCE
Make sure that the front wheel does not turn while
the rear brake lever is applied.

BRAKE LIGHT SWITCH

Apply the brake levers.
The brake light
Make sure the brake light comes on just prior to the
switch on the brake
brake actually being engaged.
lever cannot be
adjusted.
If the brake light fails come on, inspect the brake
light switch (page 22-31).

BRAKE LOCK OPERATION

INSPECTION
Unlock the parking brake lever by pulling it.
Pull the parking brake lever slowly and count the
number of notch until the parking brake lever is
locked.
STANDARD: 5 – 8 notch
If it is out of standard, adjust the parking brake
(page 4-20).
ADJUSTMENT
Support the scooter on its center stand.
Unlock the parking brake lever by pulling it.
Pull the parking brake lever until you hear one
notch.
Turn the rear wheel slowly by hand and turn the
Do not adjust the
adjusting nut until there is a slight drag.
parking brake
adjusting nut with
tool. Please adjust it
by hand.
4-20
maxiscooter-club.ru
NSS250A shown:
NSS250A shown:
PARKING BRAKE LEVER
ADJUSTING NUT