FUEL SYSTEM (PGM-FI)
FUEL TANK
REMOVAL/INSTALLATION
Remove the under cover (page 3-30).
Remove the inner cover (page 3-27).
Disconnect the fuel connect fitting from the fuel
pump unit (page 6-71).
Remove the following:
– Bolts
– Clamp
– Fuel tank assembly
Remove the screws and fuel tank cover.
Installation is in the reverse order of removal.
TORQUE:
Fuel tank bolt:
22 N·m (2.2 kgf·m, 16 lbf·ft)
• Always replace the lower side of the fuel tank
mounting bolt with a new one.
• Route the wire harness properly (page 1-21).
AIR CLEANER HOUSING
REMOVAL
• Be careful not to damage the hoses and connect-
ing boot.
Remove the following:
– Luggage lower box (page 3-16)
– PAIR control solenoid valve (page 6-105)
Remove the air cleaner housing mounting bolt/
washers.
6-80
maxiscooter-club.ru
SCREWS
FUEL TANK
BOLT/WASHERS
CLAMP
BOLTS
FUEL TANK COVER