Remove the one-way screws.
Remove the screw and handle lock module.
Remove the O-ring and replace it with a new one.
Installation is in the reverse order of removal.
Be sure to replace
the screws with
new ones.
IGNITION SWITCH REMOVAL/
INSTALLATION
Remove the handle lock module (page 23-26).
Remove the torx screws and ignition switch.
Installation is in the reverse order of removal.
• Install the ignition switch to the handle lock mod-
ule aligning the switch groove with the handle
lock module boss.
maxiscooter-club.ru
Honda Smart Card Key System
HANDLE LOCK MODULE
SCREW
O-RING
TORX SCREWS
BOSS
Align
ONE-WAY SCREWS
IGNITION SWITCH
GROOVE
23-27