Opener Damper; Rear Seat; Floor Mat - Honda NSS250S Manual

FRAME/BODY PANELS/EXHAUST SYSTEM

OPENER DAMPER

REMOVAL/INSTALLATION
Remove the front seat (page 3-7).
Remove the bolt, washer and opener damper.
Installation is in the reverse order of removal.

REAR SEAT

REMOVAL/INSTALLATION
Open the front seat.
Release the bosses of the rear seat from the grom-
mets.
Remove the rear seat by sliding the rear seat for-
ward and releasing the tabs of the rear seat from the
slots.
Install the rear seat by installing the tabs to the slots
and bosses to the grommets.
Close the front seat.

FLOOR MAT

REMOVAL/INSTALLATION
Release the bosses on the reverse side of the floor
mat and remove the floor mat.
Install the floor mat by aligning the bosses on the
reverse side of the floor mat and holes of the floor
step.
3-8
maxiscooter-club.ru
OPENER DAMPER
BOSSES
REAR SEAT
BOSSES
HOLES
BOLT/WASHER
TABS
GROMMETS
FLOOR MAT