Honda NSS250S Manual page 523

maxiscooter-club.ru
2. ABS Power Input Line Open Circuit Inspection
Turn the ignition switch OFF.
Check the continuity between the ABS modula-
tor of the wire side and ground.
TOOL:
Test probe
CONNECTION: Black/light green (+) – Green (–)
Does the battery voltage exist?
YES – Open circuit in Black/light green wire
NO – • Open circuit in Green wire
• Intermittent failure (Replace the ABS
MAIN fuse (5 A), and recheck.)
3. Failure Reproduction
Connect the ABS modulator 25P connector.
Erase the problem code (page 18-9).
Test ride the scooter above 30 km/h (18 mph).
Retrieve the problem code (page 18-8).
Does the indicator blink 61 or 62 times?
YES – Faulty ABS modulator
NO – Power circuit is normal (intermittent
failure).
PROBLEM CODE 71 (Tire Size)
• Check the following and correct the faulty part.
– Incorrect tire pressure.
– Tires not recommended for the scooter were
installed (incorrect tire size).
– Deformation of the wheel or tire.
1. Failure Reproduction
Erase the problem code (page 18-9).
Test ride the scooter above 30 km/h (18 mph).
Retrieve the problem code (page 18-8).
Does the indicator blink 71 times?
YES – Faulty ABS modulator
NO – Tire size is normal (intermittent failure).
25P CONNECTOR
(Wire side/female terminal)
07ZAJ-RDJA110
ABS (NSS250A)
Black/light green
ABS INDICATOR
ABS INDICATOR
18-23