Honda NSS250S Manual page 538

BATTERY/CHARGING SYSTEM
BATTERY
REMOVAL/INSTALLATION
Turn the ignition switch OFF.
Always turn the
Open the front seat and luggage box mat.
ignition switch OFF
before removing
Remove the screws and battery cover.
the battery.
Remove the screws and battery band.
Remove the bolt and disconnect the battery nega-
tive (–) cable from the battery.
Remove the bolt and disconnect the battery positive
(+) cable from the battery.
Remove the battery.
Install the battery in the reverse order of removal.
Route the battery
cables properly
• Connect the positive (+) cable first and then the
(page 1-21).
negative (–) cable.
19-6
maxiscooter-club.ru
NSS250A shown:
BATTERY COVER
NSS250A shown: BATTERY BAND
BOLTS (+) CABLE
(–) CABLE
SCREWS
SCREWS