maxiscooter-club.ru
ABS INDICATOR STAYS ON (Indicator
does not go off when the scooter is
running and problem code is not
indicated by the retrieval procedure)
1. Service Check Line Short Circuit Inspection
Turn the ignition switch OFF.
Disconnect the ABS modulator 25P connector
(page 18-28).
Check for continuity between the ABS modulator
25P connector of the wire side and ground.
TOOL:
Test probe
CONNECTION: Brown/White – Ground
Is there continuity?
YES
– Short
circuit
between the service check 3P (Natural)
connector and ABS modulator.
NO
– GO TO STEP 2.
2. Indicator Signal Line Short Circuit Inspection
Check the continuity between the ABS modula-
tor 25P connector at the wire side and ground.
TOOL:
Test probe
CONNECTION: Red/black – Ground
Is there continuity?
YES
– GO TO STEP 3.
NO
– Short circuit in Red/black wire between
the combination meter and ABS modu-
lator.
25P CONNECTOR
(Wire side/female terminals)
07ZAJ-RDJA110
in
Brown/white
wire
25P CONNECTOR
(Wire side/female terminal)
07ZAJ-RDJA110
ABS (NSS250A)
Brown/White
Red/black
18-13