FRAME/BODY PANELS/EXHAUST SYSTEM
REAR BODY LOWER COVER
REMOVAL/INSTALLATION
Remove the screws.
Remove the rear body lower cover by slightly slid-
Be careful not to
ing the rear body lower cover backward and
damage the tabs,
unhooking the tabs, hooks and snap fit clips from
hooks, snap fit clips
the slots.
and slots.
Installation is in the reverse order of removal.
• Make sure that the tabs, hooks and snap fit clips
of the rear body lower cover are properly
installed.
3-10
maxiscooter-club.ru
REAR BODY UPPER COVER
SLOTS
SCREWS
COMBINATION LIGHT
HOOKS
TABS
SNAP FIT CLIPS
REAR BODY LOWER COVER