Honda NSS250S Manual page 380

FINAL REDUCTION
Install the final reduction case.
Install the bolts and tighten it to the specified torque
in a crisscross pattern in two or three steps.
TORQUE: 24 N·m (2.4 kgf·m, 18 lbf·ft)
Install the collar.
Install the rear wheel speed sensor (page 18-26).
NSS250A:
Install the following:
– VS sensor (page 22-20)
– Clutch/driven pulley assembly (page 11-36)
– Rear wheel (page 16-13)
Fill the final reduction case with oil (page 4-17).
12-14
maxiscooter-club.ru
FINAL REDUCTION CASE
BOLTS
COLLAR