Floor Skirt - Honda NSS250S Manual

FLOOR SKIRT

REMOVAL/INSTALLATION
Remove the floor mat (page 3-8).
When removing the left floor skirt, lower the side-
stand.
Remove the screws and trim clip A.
Release the front end tab of the floor skirt from the
Be careful not to
groove by carefully pulling the front end of the floor
damage the tabs
skirt.
and trim clip hole
Release the trim clip hole of the floor skirt from the
on the floor skirt.
under cover.
Remove the floor skirt by releasing the rear end tab
of the floor skirt from the floor step groove.
GROOVE
Installation is in the reverse order of removal.
• Make sure that the tabs of the floor skirt is prop-
erly installed.
maxiscooter-club.ru
SCREWS
TABS
FRAME/BODY PANELS/EXHAUST SYSTEM
TAB
GROOVE
TRIM CLIP A
FLOOR SKIRT
GROOVE
TAB
3-9