Honda NSS250S Manual page 341

Hide thumbs Also See for NSS250S:

Table of Contents

maxiscooter-club.ru

Remove the dust seal.

Remove the ramp plate and slide pieces from the

movable drive pulley face.

Remove the weight rollers from the movable drive

pulley face.

Check the drive belt for cracks, separation or abnor-

mal or excessive wear.

Measure the drive belt width.

SERVICE LIMIT: 25.5 mm (1.00 in)

Replace the drive belt if necessary.

DRIVE PULLEY/DRIVEN PULLEY/CLUTCH

WEIGHT ROLLER

DRIVE PULLEY FACE

25.5 mm (1.00 in)

Chapters

Table of Contents