Rocker Arm Removal - Honda NSS250S Manual

CYLINDER HEAD/VALVES
CAM SPROCKET/CAMSHAFT/ROCKER
ARM REMOVAL
CAM SPROCKET REMOVAL
Remove the cylinder head cover (page 9-7).
Remove the sealing bolt, washer and spring from
the cam chain tensioner lifter.
• The sealing bolt can be removed with the throttle
body is installed.
Remove the bolts and cam chain tensioner lifter.
Remove the gasket.
Remove the bolts and cam sprocket.
Attach a piece of
wire to the cam
chain to prevent it
from falling into the
crankcase.
Slide the rocker arms to the spring side and remove
the shims.
• Do not allow the shims to fall into the crankcase.
• Mark all shims to ensure correct reassembly in
their original locations.
• The shims can be easily removed with a twee-
zers or a magnet.
9-8
maxiscooter-club.ru
SEALING BOLT/WASHER
GASKET
CAM CHAIN TENSIONER LIFTER
CAM SPROCKET
ROCKER ARMS SHIMS
SPRING SHIMS
SPRING
BOLTS
BOLTS