Honda NSS250S Manual page 235

maxiscooter-club.ru
FUEL SYSTEM (PGM-FI)
Disconnect the right crankcase breather hose from
RIGHT CRANKCASE BREATHER HOSE
the air cleaner housing.
Loosen the connecting boot band screw and
remove the air cleaner housing.
SCREW
INSTALLATION
Install the connecting boot of the air cleaner hous-
RIGHT CRANKCASE BREATHER HOSE
ing to the throttle body.
CONNECTING BOOT
Connect the right crankcase breather hose to the air
cleaner housing.
Tighten the connecting boot band screw to the
specified torque.
TORQUE: 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
SCREW
Install the air cleaner housing mounting bolt/wash-
ers and tighten its bolts to the specified torque.
TORQUE: 11 N·m (1.1 kgf·m, 8 lbf·ft)
Install the following:
Route the wires
and hose properly
– PAIR control solenoid valve (page 6-105)
(page 1-21).
– Luggage lower box (page 3-16)
BOLT/WASHERS
6-81