Honda NSS250S Manual page 423

Ball race remover shaft
07JAC-PH80200
TROUBLESHOOTING
Hard steering
• Insufficient tire pressure
• Faulty tire
• Steering stem adjusting nut too tight
• Worn or damaged steering head bearing
• Worn or damaged steering head bearing race
• Bent steering stem
Steers to one side or does not track straight
• Bent front axle
• Faulty tire
• Wheel installed incorrectly
• Worn or damaged front wheel bearings
• Unbalanced fork fluid level
• Bent fork
• Improperly tightened fork pipes
• Damaged or loose steering head bearings
• Damaged frame
• Worn or damaged engine mounting bushings (page 8-4)
Front wheel wobbles
• Bent rim
• Worn or damaged front wheel bearings
• Axle fastener not tightened properly
• Unbalanced front wheel and tire
• Faulty tire
Front wheel turns hard
• Faulty front wheel bearings
• Bent front axle
• Front brake drag
Soft suspension
• Low tire pressure
• Weak fork spring
• Deteriorated fork fluid
• Incorrect fork fluid weight (low viscosity)
• Insufficient fluid in fork
Stiff suspension
• High tire pressure
• Bent fork pipes
• High fluid level in fork
• Incorrect fork fluid weight (high viscosity)
• Clogged fork fluid passage
Suspension noise
• Loose fork fasteners
• Insufficient fluid in fork (low viscosity)
• Worn fork bottom case guide busing
maxiscooter-club.ru
Remover weight
07741-0010201
FRONT WHEEL/SUSPENSION/STEERING
15-5