Honda NSS250S Manual page 448

FRONT WHEEL/SUSPENSION/STEERING
Install and tighten the steering stem adjusting nut to
Refer to torque
the specified torque.
wrench reading
information on page
TOOL:
15-3 ''Service
Pin spanner
Information''.
TORQUE:
Actual:
Indicated: 18 N·m (1.8 kgf·m, 13 lbf·ft)
Turn the steering stem lock-to-lock several times to
seat the bearing.
Temporarily loosen the steering stem adjusting nut
to the specified torque.
TORQUE: 0 N·m (0 kgf·m, 0 lbf·ft)
Install the following:
– Fork (page 15-25)
– Front wheel (page 15-17)
Lower the front wheel on the ground.
Tighten the steering stem adjusting nut to the speci-
Refer to torque
fied torque.
wrench reading
information on page
TOOL:
15-3 ''Service
Pin spanner
Information''.
TORQUE:
Actual:
Indicated: 1.8 N·m (0.2 kgf·m, 1.3 lbf·ft)
Install the lock washer to the steering stem by align-
ing the tab of the lock washer with the groove of the
steering stem.
15-30
maxiscooter-club.ru
07702-0020001
25 N·m (2.5 kgf·m, 18 lbf·ft)
07702-0020001
2.5 N·m (0.3 kgf·m, 1.8 lbf·ft)
STEERING STEM ADJUSTING NUT
STEERING STEM ADJUSTING NUT
LOCK WASHER
PIN SPANNER
PIN SPANNER
Align