Honda Smart Card Key System
REMOVAL/INSTALLATION
Remove the luggage lower box (page 3-16).
Disconnect the RF unit 5P (Green) connector and
remove the RF unit.
Installation is in the reverse order of removal.
LF ANTENNA
REMOVAL/INSTALLATION
Remove the rear meter panel (page 3-22).
Remove the trim clip and front actuator cover.
Turn the ignition switch OFF.
Disconnect the LF antenna 2P (Natural) connector.
Remove the screws and LF antenna.
Installation is in the reverse order of removal.
TORQUE:
LF antenna screw: 1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
23-30
maxiscooter-club.ru
TRIM CLIP
LF ANTENNA
SCREW
5P CONNECTOR
ACTUATOR COVER
2P CONNECTOR