Honda NSS250S Manual page 631

maxiscooter-club.ru
EM CONNECTOR LINE INSPECTION
(WITH TEST PROBE)
Remove the battery cover (page 19-6).
Remove the inner cover (page 3-27).
Remove the dummy connector.
Release the EM 2P (Blue) connector from the battery
band.
Disconnect the handle lock module 21P (Black) con-
nector (page 23-26).
Check the continuity between the handle lock mod-
ule 21P and EM 2P connectors.
CONNECTION: Green/black – Green/black
Black/brown – Black/brown
There is continuity if the system is normal.
If there is no continuity, check for open circuit in
Green/black and/or Black/brown wire.
EM CONNECTOR LINE INSPECTION
(WITH TEST HARNESS)
Remove the battery cover (page 19-6).
Remove the dummy connector.
Release the EM 2P (Blue) connector from the battery
band.
Honda Smart Card Key System
2P CONNECTOR
NSS250A shown:
DUMMY CONNECTOR
HANDLE LOCK MODULE 21P CONNECTOR
(Wire side/female terminals)
Green/
black
Black/
blown
EM 2P CONNECTOR
(Wire side/female terminals)
NSS250A shown: 2P CONNECTOR
DUMMY CONNECTOR
BATTERY BAND
Green/
black
Black/
blown
BATTERY BAND
23-25