Honda NSS250S Manual page 530

ABS (NSS250A)
Remove the bolt/washers.
Remove the ABS modulator from the frame.
Be careful not to
bend or damage
the brake pipes
during ABS
modulator
assembly removal.
INSTALLATION
ABS MODULATOR
BRAKE PIPE (TO DELAY VALVE)
BRAKE PIPE (TO REAR
BRAKE CALIPER)
BOLT
BRAKE PIPE JOINT
JOINT NUTS (14 N·m 1.4 kgf·m, 10 lbf·ft)
Install the ABS modulator assembly (so the assem-
Be careful not to
bly does not interfere with the brake pipes).
bend or damage
the brake pipes
Install the bolt/washers.
during ABS
modulator
assembly
installation.
18-30
maxiscooter-club.ru
MOUNTING RUBBERS
BOLT/WASHERS
BOLT/WASHERS
BRAKE PIPE (TO FRONT BRAKE CALIPER)
BOLT/WASHER
BRAKE PIPE (TO RIGHT MASTER CYLINDER)
BRAKE PIPE (TO LEFT MASTER CYLINDER)
BOLT/WASHERS
MODULATOR
BOLT
BRAKE PIPE JOINTS
BRAKE PIPE JOINT
BOLT
MODULATOR