Danfoss VLT MSD 510 Operating Manual page 241

Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
VLT Servo Drive Systems Glossary
A
A-flange
ACM
Ambient temperature
Automation Studio™
B
Bearings
®
Beckhoff
B&R
B side
Brake
C
®
CANopen
CE
CIA DS 402
Connector (M23)
Cooling
D
DAM
DC-link
DC-link voltage
DC voltage
DSD
E
EPSG
ETG
®
EtherCAT
Danfoss A/S © 2019.10
The A side is the shaft side of the servomotor.
Auxiliary Capacitors Module.
The temperature in the immediate vicinity of the servo system or compo-
nent.
Automation Studio is a registered trademark of B&R. It is the integrated
software development environment for B&R controllers.
The ball bearings of the servomotor.
Beckhoff is a registered trademark of and licensed by Beckhoff Automation
GmbH, Germany.
Multi-national company, specializing in factory and process automation
software and systems for a wide range of industrial applications.
The rear side of the servo drive with the plug-and-socket connectors.
Mechanical holding brake on the servo drive.
CANopen is a registered community trademark of CAN in Automation e.V.
European test and certification mark.
Device profile for drives and motion control. CIA is a registered community
trademark of CAN in Automation e.V.
Servo drive hybrid connector.
Decentral servo drives are cooled by natural convection (without fans). The
Servo Drive Modules SDM 511/SDM 512 and all system modules except the
ACM 510 are cooled by an internal fan.
Decentral Access Module
Each servo drive has its own DC-link, consisting of capacitors.
A DC voltage shared by several servo drives connected in parallel.
A direct constant voltage.
Decentral Servo Drive
Ethernet POWERLINK Standardization Group.
EtherCAT Technology Group
EtherCAT (Ethernet for Control Automation Technology) is an open high-
performance Ethernet-based fieldbus system. EtherCAT is registered trade-
VLT Servo Drive Systems Glossary
AQ262450196490en-000101 / 175R1170| 241