Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
Table 140: Pin Assignment of AC Mains Connector
Pins
Descrip‐
tion
(left to
right)
1
L3
2
L2
3
L1
11.7.7.1 Mains Cable Cross-Sections for PSM 510
Table 141: Mains Cable Cross-Sections for PSM 510
Minimum cable cross-section for CE
Minimum cable cross-section for UL
11.7.8 Motor Connector
The motor connectors are located on the bottom of the Servo Drive Modules (SDM 511 and SDM 512).
Illustration 140:
Motor Connector
224 | Danfoss A/S © 2019.10
Notes
Rating/parameter
Used to connect
Nominal voltage: 400–480 V AC ±10%
L1/L2/L3
Nominal power: 30 kW
Maximum cross-section: 16 mm
Conductor cross-section range 0.75–16 mm
PSM 510 (10 kW)
2
4 mm
(minimum 70 °C, Cu)
AWG 10
(minimum 60 °C, Cu)
2
(AWG 4)
2
, solid or flexible (AWG 18–AWG 4)
PSM 510 (20 kW)
2
16 mm
(minimum 70 °C, Cu)
AWG 6
(minimum 60 °C, Cu)
AQ262450196490en-000101 / 175R1170
Specifications
PSM 510 (30 kW)
2
16 mm
(minimum 90 °C, Cu)
AWG 4
(minimum 75 °C, Cu)
Need help?
Do you have a question about the VLT MSD 510 and is the answer not in the manual?