Danfoss VLT MSD 510 Operating Manual page 120

Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
Illustration 85:
4. In the Edit Ethernet Node window, select the option Use IP parameters.
5. Enter the IP address and Subnet mask and click on Assign IP configuration.
Illustration 86:
6. Enter the device name that was previously selected and click on Assign Name and then Close.
120 | Danfoss A/S © 2019.10
Selecting the Servo Drive
Entering the IP Address and Assigning the IP Configuration
Commissioning
AQ262450196490en-000101 / 175R1170