Brake Connectors - Danfoss VLT MSD 510 Operating Manual

Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
Pin
3
4
5

11.7.2 Brake Connectors

Brake connectors are located on the Power Supply Module (PSM 510) and the Servo Drive Modules (SDM 511/SDM 512).
11.7.2.1 Brake Resistor Connector on PSM 510
Illustration 132: Brake Connector on PSM 510
Table 129: Pin Assignment of Brake Connector on PSM 510
Pins (left to Description
right)
1 DC+/R+
2 R–
The maximum length of the brake cable is 30 m (shielded).
-
11.7.2.2 Brake and Motor Temperature Sensor Connector on SDM 511/SDM 512
The brake connector on SDM 511/SDM 512 is used for both the mechanical brake and the temperature sensor (if present).
Danfoss A/S © 2019.10
Description
FE: Functional earth
DC–
DC+
Notes
Used for connecting a brake re-
sistor.
Ratings
Nominal voltage: 560–800 V DC
Maximum brake current: 80 A
Conductor cross-section range: 0.75–16 mm
N O T I C E
Specifications
2
(AWG 18–AWG 4)
AQ262450196490en-000101 / 175R1170| 215