Danfoss VLT MSD 510 Operating Manual page 141

Operating Guide | VLT® Multiaxis Servo Drive MSD 510 System
6.16.4.4.3 Disabling Unused Protocols on the Network Interface on the PC
Procedure
1. Open the Network and Sharing Center.
2. On the left, click on Change adapter settings.
3. Right-click on the network interface used for fieldbus communication and select Properties.
4. Uncheck all checkboxes except the one for Internet Protocol Version 4 (TCP/IPv4).
5. Disable the IPv4 Checksum offload on the network interfaces as described in
Communication.
Illustration 105: Local Area Connection 2 Properties
Danfoss A/S © 2019.10
6.16.4.3.2 Network Settings for Indirect
AQ262450196490en-000101 / 175R1170| 141
Commissioning